Oztent USA

How to Set Up the Oztent Jet Tent Gazebo with Walls

How to Set Up the Oztent Jet Tent Gazebo with Walls

By Oztent USA | Published: 2026-10-21

Category: How-to Guides

Learn the quickest way to set up your Oztent Jet Tent Gazebo with walls. Follow these step-by-step instructions for a stable, weather-ready shelter.

Quick Answer

Set up the Oztent Jet Tent Gazebo with walls in under 10 minutes by first staking the frame, then attaching the walls and mesh panels in the correct order.

Why Wall Order Matters

The Jet Tent Pro Gazebo is designed for fast setup, but attaching walls in the wrong sequence can cause misalignment and flapping in wind. Always install the rear wall first, then the side walls, and finally the front wall if used. This prevents zipper binding and ensures a snug fit.

Setup Steps

  1. Choose a Level Spot and Orient the Gazebo: Unfold the Jet Tent Pro Gazebo frame on flat ground. Face the main opening away from prevailing wind. Extend each leg fully and lock the frame into place. Check that all leg locks click fully to avoid collapse.
  2. Stake the Frame: Drive the supplied stakes through the leg base loops at a 45-degree angle away from the gazebo. Use all four corners before moving on. On hard ground, use a mallet and avoid staking directly downward—angled stakes hold better in wind.
  3. Attach the Rear Wall: Unfold the solid rear wall and align the zipper with the rear frame pole. Start zipping from the bottom center outward to each corner. Smooth the fabric as you go to prevent bunching. If the zipper jams, stop and back up slightly—forcing it can damage the teeth.
  4. Add Side Walls: Attach the left and right solid walls using the same bottom-center-to-corners zipping method. For ventilation, swap one solid wall for a mesh wall on the leeward side. Mesh walls zip the same way as solid walls; store unused panels in the included bag to keep them clean.
  5. Install the Front Wall or Leave Open: If using the front wall, zip it on last. For a more open setup, leave the front wall off and use the mesh wall as a bug screen. Secure any loose panel ties to the frame. A fully enclosed gazebo traps heat—open the front or use mesh walls on warm days.
  6. Tension and Adjust: Walk around the gazebo and tighten all webbing straps on the walls and frame. Adjust leg heights slightly if the floor is uneven. Re-stake any loose corners. Tighten straps evenly to avoid distorting the frame shape.

What You Need

  • Oztent Jet Tent Gazebo + Walls BUNDLE: Includes 3 solid walls and 3 mesh walls for the Jet Tent Pro Gazebo. You can mix solid and mesh panels to control airflow and privacy, adapting the shelter to weather and activity.
    Oztent Jet Tent Gazebo + Walls BUNDLE
    Oztent Jet Tent Gazebo + Walls BUNDLE

Shop Related Products

Oztent Jet Tent Gazebo + Walls BUNDLE

Oztent Jet Tent Gazebo + Walls BUNDLE

$397.94 $593.94

Shop Now