How to Replace Oztent Tent Hinges: Step-by-Step Guide

By Oztent USA | Published: 2026-10-26

Category: How-to Guides

Learn how to replace broken Oztent tent hinges with this step-by-step guide. Includes tips on identifying the right part and installing the hinge pack of 2.

Quick Answer

Replace a broken Oztent tent hinge by ordering the Oztent Replacement Parts - Hinge (Pack of 2), then removing the old hinge and installing the new one with the same screws.

When to Replace an Oztent Hinge

Oztent hinges are built to last, but heavy use, corrosion, or accidental impact can cause them to crack or seize. If your tent frame no longer folds smoothly or the hinge shows visible damage, replacement is the safest fix. Trying to bend a broken hinge back into place can weaken the frame and lead to further failure.

Tools You Will Need

You only need basic tools: a Phillips head screwdriver (or the appropriate bit for your tent model) and the new Oztent hinge pack. No drilling or cutting is required. Check that the replacement hinge matches your tent’s exact model; Oztent offers specific hinge packs for different frame sizes.

Step-by-Step Hinge Replacement

1. Identify the broken hinge: Open your tent and locate the hinge that is cracked, stuck, or broken. Check the Oztent diagram on the product page to confirm you have the correct hinge model. Common mistake: ordering the wrong hinge type. Verify your tent model before purchasing.
2. Remove the old hinge: Using a Phillips head screwdriver, unscrew the bolts holding the damaged hinge to the frame. Keep the screws aside—they are reusable with the new hinge. Checkpoint: If screws are rusted or stripped, replace them with matching stainless steel hardware.
3. Install the new hinge: Place the new hinge (from the pack of 2) in the same position as the old one. Insert the screws and tighten them firmly but not over-tightened to avoid stripping. Common mistake: over-tightening can crack the new hinge. Stop when snug.
4. Test the movement: Fold and unfold the tent frame a few times to ensure the hinge moves smoothly and the frame aligns properly. If the hinge binds, loosen the screws slightly and re-align the hinge before tightening again.

Product Facts

Oztent Replacement Parts - Hinge (Pack of 2): An easy fix if you break a part of your Oztent RV; determine the part in the diagram, order it, and it will be at your door soon. This hinge pack is the exact replacement part for many Oztent RV tent frames, so you can restore smooth folding without modifying the frame.
Oztent Replacement Parts - Hinge (Pack of 2)